You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, download files, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
i am using O2 atom whice i find out on the o2 website there are later Rom update Xda Atom ROM Upgrade (ENG) 20060426B1WWE_RS00052 and i have try to downloan by the activesyne 4.5 can't support win vista how to i downloan the later Rom please advice
If I understand correctly the instructions tell you to usee Acitve Sync, but you have Vista which does not use Active Sync (renamed to Windows Mobile Device Center)? If I understand that correctly I would think the Rom would still install as what you need is an active connection between your PPC and the PC.
What OS version is currently running on your device? WMDC will not work with any version older than WM5. This has been an issue for people with pre-WM5 devices and Vista-based PC hosts since ActiveSync (which works with older versions of WM) will not run on Vista. At this time, there is no solution other than finding a host PC still running XP or Windows 2000.
If your device OS is one that should work with WMDC, check the WMDC version. If it is 6.0 then go to the Microsoft site and download 6.1 which was released recently. The update solves some problems and also fully activates a few options that were not really functional in the initial release.
If your device is WM5 or later, what happens when you connect your PPC to your PC? Does WMDC try to connect? Any error messages? Have you ever been able to connect?
hi i am using wm5 and the error message show no device are connected whice i have connect my device to the use cable.and i have try the later window mobile device center 6.1 still same
hi i am using wm5 and the error message show no device are connected whice i have connect my device to the use cable.and i have try the later window mobile device center 6.1 still same
With WM5 and later your PC needs to be able to assign an IP address to your PPC when connecting. be sure that DHCP is enabled as a service on your PC (it probably is, and I assume this to be true for Vista) and that you are not being blocked by your firewall.
Prior to DHCP each IP device had an IP address (like 192.168.1.250) manually assigned. Since DHCP Windows takes care of this for you and your PPC needs to be able to get an IP address from Windows.
I am not sure if you should be able to find the address or not. If DHCP is enabled on your PC (check under Services) then your PPC is getting an address. If memory serves me there is a specific address being used, but i don't recall what it is.
Linear Mode
