You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, download files, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
my daughter broke the power supply connecter inside the phone, it is not connected inside anymore. i need to know how to take it apart to reconnect it inside the phone!! please help!!!
I can tell you how to get the back off and get to the particular place that you need but the actual fixing of it i don't know because you have to put solder joints at precise points. If you take off the back battery cover and tak out the battery, sim and any memory cards you will see 2 screws. These screws are a T6 (Torque size 6). Remove those. You will also need to pop off the plate that covers the camera. Use caution as you antenna is connected to that back plate. I reccommend using a very small flat head screw driver. There will be 2 more screws there, remove them. Then start taking the back off at the bottom corner by the stylus silo. It will take a little work as plastic clips hold it in. After you get the back off there is one more screw that needs to be taken out in order to remove the board and the connections. I would take it out before I soldered anyhting to give you more room and alleviate the chance of melting part of the plastic housing.
Linear Mode
