You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, download files, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
I posted this under my thread regarding the fact that mine won't work, but thought I would re-post it so other people could find it easily. This is related to HP devices but the general rules should work for everyone.
A Guide to Settings for Wireless Internet Connections
with iPaq Handheld Computers Running WM5.0
(in two parts: Part One—settings on the iPaq;
Part Two—settings on the wireless router)
Part One: iPaq
These are the generic settings to be made on iPaqs running WM5.0 for using Wi-Fi to connect to the Internet through a wireless router. (NOTE: It is assumed that no security or encryption has been enabled on either the iPaq or the router.) These settings will work with most installations, though not necessarily all.
Tap: Start Menu Choose: Settings Tap: Connections (tab)
1. Tap Connections (icon)
Screen Title = Connections
Tap: Tasks (tab)
Add a new modem connection (leave at defaults)
Add a new VPN server connection (leave at defaults; no hostname entered)
Tap: Set up my proxy server Screen Title = My Work Network
This network connects to the Internet [checked]
All else unchecked and blank
Tap: OK
Tap: Advanced (tab)
Tap: Select Networks Screen Title = Network Management
(top: "Programs that . . . connect to Internet) Set to: "My Work Network"
Tap: Edit Screen Title = My Work Network
General (tab): leave name My Work Network
Modem (tab): leave blank
Proxy Settings (tab): This network connects to the Internet [checked]
All else unchecked and blank
Tap: OK Screen Title: Network Management
(bottom: "Programs . . . connect to private network) Set to: "My Work Network"
Tap: Edit Screen Title: My Work Network
General (tab): leave name My Work Network
VPN (tab): leave blank
Proxy Settings: This network connects to the Internet [checked]
All else unchecked and blank
Tap: OK Screen Title: Network Management
Tap: OK Screen Title: Connections
Tap: Dialing Rules: make sure blank
Tap: Exceptions: make sure blank
Tap: OK
[back at Start Menu - Settings - Connections (tab) screen]
2. Tap: Network Cards (icon)
Screen Title: Configure Network Adapters
(top: My network card connects to) Set to: "Work"
Tap: on "HP iPaq Wi-Fi Adapter" Screen Title: HP iPaq Wi-Fi Adapter
Tap: IP Address (tab)
"Use server-assigned IP address" [checked]
Rest of screen blank
Tap: Name Servers (tab): make sure all blank
Tap: OK
Tap: OK in Adapters alert box Screen Title: Configure Network Adapters
Tap OK
[back at Start Menu - Settings - Connections (tab) screen]
Tap iPaq Wireless (icon) Tap: WiFi button to turn WiFi on
3. Tap: Settings
Screen Title: Configure Wireless Networks
Tap: View Wi-Fi Networks
[working from bottom of this page]
"Networks to access": Choose: "Only access points"
In box “Configure Wireless Networds”: tap on name of preferred network Screen Title: Configure Wireless Network [note singular]
Tap: General (tab)
Network name: should be the one you tapped
Connects to: ("Internet" or "Work"-both seem to work)
"This is a device-to-device connection" [unchecked]
Tap: Network Key (tab) Screen Title: Configure Network Authentication
Authentication: Open
Data Encryption: Disabled
"The Key is provided . . . automatically" [unchecked]
Tap: 802.1x (tab) Screen Title: Configure Network Authentication
"Use IEEE 802.1x . . . access control" [unchecked]
Tap: OK Screen Title: Configure Wireless Networks
Tap: OK
Screen Title: iPaq Wireless Tap: OK
Do a soft reset
Part Two: Router
Here are the most fundamental and straightforward settings to check on your router. These assume that the router will distribute IP addresses dynamically to networked devices. Such a set-up is what is desired in most situations, and will usually work without difficulty. (Sometimes more complicated measures become necessary, but this is where to start.)
(Access to the router is almost always by means of a standard internet browser running on a device that is in communication with the router. The router's manual will explain what URL to input and what userid/password to use to gain access.)
Once at the router's set-up pages, check that:
1. All security/encryption has been turned off. (If it can be done without disrupting the network, it is desirable to do this until a stable connection has been established. Security/encryption should also be turned off on the iPaq.) Specifically, make sure: a. that WEP has been disabled b. that Authentication has been set to Open c. that any firewall has been disabled d. that MAC Address Filtering has been disabled e. that Broadcast SSID is enabled.
2. DHCP or DHCP Server has been enabled. (And the iPaq should be set to "Obtain IP address from server.")
3. "Wireless Mode" (or "Wireless Network Mode") has been set to "mixed" or to "802.11b and 802.11g." (Current iPaqs are unable to operate at the speed of 802.11g.) If problems persist and there is an option to set this mode to "802.11b only," try that setting.
4. Any accelerator features, or "Turbo" features, have been disabled. (They are likely to be too fast for the iPaq.)
5. If there is an option to set "Preamble Type," choose "Long Preamble" (rather than Short).
For any changes made, be sure to click "Apply" before moving to another page in the setup menus.
Somewhere in the menus, there will be an opportunity to look at the router's "DHCP Client List." Look to see whether the iPaq is on the list. (It will usually be identified by its MAC address. You can find the iPaq's MAC address by going on the iPaq to Start Menu > Settings > System > HP Asset Viewer > WiFi [or WLAN].) If the iPaq is on the client list, that confirms, at least, that a connection has been established between the iPaq and the router.
It is also always a good idea to check the manufacturer's web site to see if there is a firmware upgrade for the router. If there is, download and install it.
__________________ If you think training is expensive,
look at the cost of ignorance!
I was going along pretty good trying to set up this wifi stuff, I have an 8125 but then I got to the part where I'm supposed to check the HP iPaq wi-fi adapter and go on from there and I didn't have that option what should I do? I'm all confused. I knew I shouldn't have bought this phone and that it would have been to hard to learn. Please help! I just want to be able to have wifi on and then be notified when I'm in a free area so I can check my school mail etc....Thanks
Guide to setting up Wifi on WM5 
Tack 
Linear Mode
