Thread: HTC HTYN Issues
View Single Post
  #3  
Old 01-25-2007, 01:16 PM
G-MAN305's Avatar
G-MAN305 G-MAN305 is offline
Junior Member
Pre-Addict
 
Join Date: Jan 2007
Device: HTC TYTN AKA CINGULAR 8525
Posts: 4
Downloads: 0
Uploads: 0

Hey Crytus, thx for the assistance.
I tried the above info and it did not work. I am on the old ATT platorm under cingular.
So should anyone out there desire to purchase the new HTC TYTN (AKA 8525) (3G) AND USE ON Cingular, ITWILL WORK!! They will feed you a bunch of horse Poo about not being able to work. Secondly, they will tell you that you need a new chip and you have to come over to there network: Notttttt Called the att tech and this is what they gave me that works fine!

Blue Settings for the Cingular 8125 (Proxy APN)
  1. From the Today Screen, tap the Start menu and tap Settings.


  2. Tap the Connections tab and tap the Connections icon.


  3. Tap Add a new modem connection.


  4. Enter the following and tap Next:


    • Enter a name for the connection: "mmode"
    • Select a Modem: Cellular Line (GPRS)
  5. In the Access point name field, enter ‘proxy’ or any other appropriate APN.


  6. Leave User name, Password and Domain blank and tap Finish. Do not tap Advanced.



  7. Tap ok in the upper right corner several times to return to the Today Screen.



Configuring the browser settings:
  1. From the Today Screen, tap the Start menu and tap Settings.


  2. Tap the Connections tab and tap the Connections icon.


  3. Tap Setup my proxy server.


  4. Verify the following settings:


    • This network connects to the Internet: Checked
    • This network uses a proxy server to connect to the Internet: Checked (except when using WIFI)
  1. Tap Advanced.
  2. Tap HTTP.


  3. Verify the following settings and tap ok.


    • Server: 10.250.250.54
    • Port: 8080
    • User name: leave blank
    • Password: leave blank
    • Domain: leave blank
  4. Tap WAP and verify the following settings, then tap ok:
    • Server: 10.250.250.54
    • Port: 8080
    • User name: leave blank
    • Password: leave blank
    • Domain: leave blank

  5. Tap Secure WAP, leave the server blank and make sure the port is 9203. Hit ok.
  6. Tap Socks.


  7. Verify the following settings and tap ok.


    • Server: 127.0.0.1
    • Port: 1080
    • Type: Socks 4
  8. Tap ok in the upper right corner several times to return to the Today Screen.
  9. Open Internet Explorer and try to connect, if it doesn’t work, perform a soft reset and try again.

Oh trust me it works great, went on google and I am about to download skype too. Good looking Gee.
Thx
G-MAN
Reply With Quote